Product Description
Specifications:
TRUCK/AUTO BATTERY
BATTERY RESENVE CAPACITY HIGH,
INSTANT HIGH DISCHARGE CURRENT STRONG ENERGY
LOW-TEMPERATURE START ABILITY
1 Super CCA Performance
2 Low Self-discharge
3 Extended Battery Life, High Temperature Resistant
4 Soncap CE
MF auto Truck battery
1. Tech Specification
2. Voltage: 12V
3. Applications: Starting battery for buses, trucks and other vehicles
4. Certificate: ISO, CE, SASO, SONCAP etc
5. Packaging: Cartons & pallets
6. Delivery: Within 30 days after receiving deposit
7. Deliver from qingdao, China.
8. OEM production available (customers provide Brand & Packaging design)
Stantard: JIS Standard & DIN Standard.
Type: Maintenance free battery
Certificates: IQNET, ISO9001, ISO14001, ISO16949, REC60095-1 CE, CQC, SONCAP, and others
Warranty: 24 Months
Brand: OEM with your brand.
Supply Ability8, 000-10, 000 Piece/pieces per day
Superior performance: 1. Composite Separator
2. Comparison of Service life between General Sparator and Composite Separator
3. Long Battery Life
4. Excellent PB-Ca Alloy
5. Comparison of Self-discharge between General Accumulator and PB-SB-CA Alloy Accumulator
General Features
1. High life
2. Long Life
3. High CCA and good starting performance
4. Good charging acceptance and vibration resistant performance
5. Application of advanced PE type separator
6. Application of TTP technology
7. Advanced sulfate-resistant technology
8. Advanced calcium lead alloy technology, maintenance -free design.
9. Reliable Labyrinth-like seal design
10. Lead alloy terminal apply heavy load
11. Full ranges models, good appearance and high standard design.
Typical Applications
1. Starting, ignition for car, Bus, truck and Mobile machinery shop.
2. Starting and ignition for diesel motor or gasoline motor.
3. It can be used as power for car, Truck, bus and other vehicle
Battery Installation Procedure
1. New Battery Acid Sp Cr is 1.250 and the battery
Voltage more than 12.30 V.
2. Measure the Sp Gr with a hydrometer, and check the voltage with
A battery tester or voltmeter.
3. If the acid level falls below the Upper / high / max Level, top up
With pure or deionized water(Never Use Acid )
4. Boost charge must be done once acid Sp Gr is lower than 1.200.
The full charge specification for battery sulphuric acid Sp Gr Is 1.250.
5. Ensure Load Test Result not less than 10.21 V.